Charging Hub. Power Up.
SoarApex UAV multi-battery charging hub up to 3 batteries simultaneously with intelligent power distribution. From 0% to 100% in 45 minutes — less downtime, more airtime for your missions.
In StockCharge Smarter, Fly Sooner
Not all charging hubs are created equal. See why professional operators choose SoarApex .
Smart Balancing
Automatically prioritizes the lowest battery. No manual swapping, no wasted cycles.
Thermal Guard
Real-time temperature monitoring with auto-throttle. Protects battery lifespan in hot climates.
LED Status
At-a-glance charge status for all 4 slots. Green means go — from across the room.
UAV Multi-battery charging hub & Power Solutions
From UAV multi-battery charging hub to enterprise-grade cabinets and tethered power systems — built for uptime, not downtime.
Universal200W Universal Charging Hub
One charger for multiple drone brands — just swap the cable. Powers up 3 batteries in ~1h50m with 200W high-output power.
- 3-Bay Simultaneous
- DJI / Autel Compatible
- IPS LCD + OTA Updates
- 60% Storage / Silent Modes
Best Seller300W Fast Charging Hub
Industry-leading 300W enterprise charging for Matrice 4E/4T. Powers 3 batteries in just 1h12m — get back in the air faster.
- 3-Bay Parallel Charging
- 1h12m (3 Batteries)
- 100W USB-C Power Bank
- 4 Modes + Silent Mode
Smart200W Smart Three-Way Charger
Multi-drone fleet solution with customizable cables for Matrice 4, Air 3, Mavic 3, and Autel EVO Max. Intelligent battery management with silent cooling.
- 3-Bay + USB-C 36W
- Universal Cable System
- 1.5" IPS LCD Display
- Silent Cooling + OTA
EnterpriseBS16 Intelligent Charging Cabinet
Enterprise-grade battery management with 5-layer safety protection, digital API monitoring, and support for M3/M4/M30/M300/M350 batteries. Rolling cabinet design for fleet operations.
- Multi-Battery Storage
- 5-Layer Safety Protection
- API Digital Management
- 4×100W Type-C Ports
Tethered PowerTK3 Tethered Power System
24-hour uninterrupted UAV power. Converts 220V AC to 400V high-voltage DC via nickel-alloy cable. Powers matrix lights, gimbal lights & cameras for continuous missions.
- 3,000W Output Power
- 7.5kg Portable
- 80m Cable Included
- 5" LCD Display
Next-GenTK4 Tethered Power System
800V high-voltage tethered power for DJI M400. 4.5kW output, supports 200m cables, and powers ML200 matrix light + GL300 gimbal light simultaneously.
- 4.5kW / 800V Output
- Up to 200m Cable
- PLC 100Mbps Bandwidth
- 5.5" HD Screen + HDMI
Power Up in Minutes
Three steps from dead batteries to mission-ready fleet. Zero configuration, maximum uptime.
Insert Batteries
Slide TB65 or WB37 batteries into the bay. Auto-detection recognizes cell chemistry and adjusts charge curve instantly.
Smart Charge
Intelligent power allocation routes optimal current to each cell. LCD shows real-time voltage, temp, and time-to-full.
Fly Ready
Auto-cutoff at 100% with trickle maintenance. Batteries stay at peak charge until you are ready to launch.
Smart Allocation
Dynamic power routing prioritizes the weakest cell. All bays finish within 5 minutes of each other.
Cycle Logging
Tracks every charge cycle per battery. Predictive alerts warn when cell degradation hits 80% capacity.
Overcharge Shield
Triple-redundancy cutoff with temperature monitoring. Zero risk of thermal runaway, even in hot hangars.
Storage Mode
One-tap discharge to 50% for long-term storage. Extends Li-ion lifespan by up to 300 cycles.
Never Ground Your Fleet.
Time is your most valuable asset. SoarApex UAV multi-battery charging hub cuts your downtime by up to 70% — 3 batteries fully charged in just 1 hour 12 minutes. Spend less time waiting, more time in the air. Ships within 24 hours.
